Capabilities
Six processes, chosen from your drawing
CNC machining, turning, grinding, wire EDM, EDM and welding. We recommend the route after reviewing the geometry, material and interfaces.
What each process is used for
Explore CNC machining, turning, grinding, EDM and welding for component and tooling projects.
CNC machining
- Best suited to
- Plates, housings, brackets and fixtures with pockets, bores and hole patterns.
- The drawing should define
- Material, datum faces, hole and thread callouts, surface requirements.
Turning
- Best suited to
- Round parts such as pins, rivets, sleeves, standoffs, shafts and mandrel components.
- The drawing should define
- Diameters, steps, thread type, concentricity and end-face requirements.
Grinding
- Best suited to
- Locating and sliding surfaces where fit and surface finish come from the drawing.
- The drawing should define
- Fit class, surface finish, heat treatment state before grinding.
Wire EDM
- Best suited to
- Sharp internal profiles, inserts and slide cores in hardened material.
- The drawing should define
- Profile drawing, material and hardness, edge and corner requirements.
EDM
- Best suited to
- Cavities, ribs and deep features that are difficult to cut conventionally.
- The drawing should define
- Feature geometry, depth, surface texture and electrode considerations.
Welding
- Best suited to
- Fabricated frames and assemblies joined from cut or machined elements.
- The drawing should define
- Assembly drawing, joint types, post-weld machining and finish.
Equipment working ranges
These figures describe the equipment. Component tolerances and process feasibility are confirmed from the drawing.
| Equipment | Working range | Listed accuracy |
|---|---|---|
| CNC milling | 700 × 500 × 500 mm | 0.002 mm |
| High-speed CNC milling | 650 × 450 × 390 mm | 0.002 mm |
| High-speed CNC milling | 850 × 550 × 550 mm | 0.002 mm |
| Wire EDM | 400 × 300 mm | 0.002 mm |
| Small-format grinding | 300 × 200 mm | 0.001 mm |
| CNC turning | Diameter 520 mm; length 1,000 mm | 0.002 mm |
| Surface grinding | 800 × 400 mm | 0.001 mm |
| Electrical discharge machining | 350 × 300 × 250 mm | 0.002 mm |
| Laser welding | Travel 1.3 m; listed product size up to 1.2 m | Confirm for the project |
Manufacturing equipment
Machining, turning, EDM, drilling and grinding equipment used across component and tooling work.

CNC lathe 
Machining center 
Surface grinder 
EDM machine 
Deep-hole drilling system 
Wire EDM machine
More equipment photographs (55)

CNC lathe 
Machining center 
Machining center 
High-speed machining center 
Tooling and fixtures 
Punch grinding machine 
Punch grinding machine 
EDM machine 
Cylindrical grinder 
Cylindrical grinder 
Deep-hole drilling system 
Deep-hole drilling system 
CNC lathe 
CNC lathe 
Centerless grinder 
NC machining equipment 
NC machining equipment 
NC machining equipment 
EDM machine 
Drilling and tapping machine 
Drilling and tapping machine 
Drilling and tapping machine 
850 machining center 
850 machining center 
Surface grinding machine 
CNC lathe 
CNC lathe 
Surface grinder 
Surface grinder 
Centerless grinder 
Grinding machine 
Grinding machine 
CNC turning equipment 
CNC turning equipment 
Surface grinder 
Centerless grinder 
Centerless grinder 
Centerless grinder 
Auxiliary tooling 
Auxiliary tooling 
Cylindrical grinder 
High-speed machining center 
Gentiger machining center 
CNC machining workshop 
CNC turning workshop 
Grinding equipment 
CNC turning equipment 
Machining center installation 
Grinding workshop 
Grinding and tool preparation area 
AgieCharmilles EDM equipment 
EDM equipment 
GF machining equipment 
Mitsubishi wire EDM equipment 
GF high-speed machining equipment
Equipment types and models
Confirm the equipment configuration and applicable unit count for your project. Paired quantities represent the two listed counts for that equipment type. Origin labels describe the equipment inventory, not component origin. Accuracy figures without a stated unit are not finished-part tolerances; dimensions and inspection criteria are confirmed against the drawing.
| Equipment type | Brand / model | Listed origin | Listed units | Listed accuracy Unit not specified |
|---|---|---|---|---|
| CNC machining | GF HSM500 | Sweden | 1 | 0.002 |
| CNC machining | GF HSM900 | Sweden | 1 | 0.002 |
| CNC machining | MAKINO F3 | Japan | 1 | 0.002 |
| CNC machining | FANNUC | Japan | 4 / 2 | 0.01 |
| CNC machining | 大兴 | China | 15 / 10 | 0.01 |
| Electrical discharge machining | MAKINO EDGE3 | Japan | 2 | 0.002 |
| Electrical discharge machining | GF FORM200 | Sweden | 1 | 0.002 |
| Electrical discharge machining | 群基 | Taiwan | 4 | 0.002 |
| Grinding | 建德 | Taiwan | 3 | 0.001 |
| CNC turning | 大连 | China | 5 | 0.01 |
| CNC turning | 程泰 | Taiwan | 8 / 2 | 0.001 |
| Grinding | 旺盤 | Taiwan | 2 | 0.001 |
| Milling | 新虎将 | Taiwan | 2 | 0.01 |
| Milling | 快捷 | Taiwan | 2 | 0.01 |
| Internal grinding | 荣光 | Taiwan | 2 | 0.001 |
| Cylindrical grinding | 荣光 | Taiwan | 2 | 0.001 |
Inside the workshops

CNC machining workshop 
Grinding workshop 
Turned components prepared for packing 
Ground shaft production 
Laser welding workstation